The Real Reason We Put Every Heater Through Hell Before It Leaves the Shop
We build caravan infrared heaters for one reason: they have to fire up instantly and hold their ground, no matter what’s happening outside. To make that happen, every single unit gets a brutal, full-power aging test before it ever leaves our hands. This isn’t some checkbox on a form. It’s a stress test that forces the heater to run at its absolute maximum, hour after hour. We’re talking full throttle, no breaks. That process shakes out the weak links early—whether it’s the halogen element, the wiring inside, or the terminal connections. And what you get for it? Fewer failures in the real world, and a heater that feels solid the moment you plug it in.
What the Test Actually Proves (and Why It Matters)
Think about where a caravan heater lives. It’s tucked into a tight spot with barely any airflow, and it has to deal with voltage that jumps around depending on shore power or the generator. So we run it at full load to see if it can handle the heat—literally. If a part can’t stand sustained high temperature, you’ll see it drift, crack, or give up the ghost fast. We also watch the electrical numbers closely, making sure it draws the right current and holds strong on insulation. If a heater can’t survive our burn-in, it doesn’t go out the door. Period.
The Trade-Off: Heat Is Real
Running at full power means serious heat builds up inside the housing. That’s not a secret—it’s physics. So yes, your install has to plan for clearance and ventilation. If the heater sits inside an enclosed panel, the parts around it need to be rated for the temperature they’ll live in. And that’s exactly why we test this way. We want you to wire it up and trust it, not cross your fingers the first night it turns cold. The aging test removes the guesswork and puts reliability where it belongs: in real performance, not in fancy promises.
Specs That Actually Earn Your Trust
We build these heaters to be drop-in workhorses. The voltage and wattage line up with typical onboard systems, and the footprint is designed for tight, practical mounting. The halogen infrared element throws direct radiant heat, so it warms people and surfaces fast—without wasting time trying to heat the whole air. Every unit that makes it through the 100% aging test leaves here with a documented full-power run time, a final insulation check, and a verified thermal profile. That’s the bar we hold ourselves to, so you can spec the heater with confidence, not crossed fingers.